Table of Contents
Advertisement
Removing the complete DCT gearbox
Replace gearbox mounting bushing (
Remove the component only.
Replacing gearbox mounting bushing
Tightening torque
Fastening gearbox mounting bush cover
Remove the complete gearbox (
Loosen the two trolley platform locking handles
(AS
to ease the gearbox (A) off the engine stud bolts.
After easing out the gearbox (A), lock the two trolley
platform lock handles
C2.02).
Tighten the eye bolts in the relative holes on the
gearbox and fit tool
Connect to a mobile hydraulic jack, lift the gearbox
from the trolley and set down in a safe place.
Screw
C2.02).
107565) and move the trolley
(AS
107565).
(AS
107564).
Nm
30 Nm
Page 11 of 13
(AS
107572)
Class
B
Advertisement
Table of Contents
