Table of Contents
Advertisement
Pedal board
Print Exit
D3.09
Pedal board
Removing the pedal board
Disconnect the battery (
Remove the complete dashboard (
Refitting the pedal board
F2.01).
E4.02).
Working from underneath the driver side of the
dashboard, detach the brake servo linkage (6),
removing the retainer clip (5).
Undo the four indicated nuts fastening the brake
servo (A) to the pedal board.
Refit the retainer clip (5) in its relative seat on the
brake servo (A).
Disconnect the connector (10) from the brake pedal
stop light switch.
Undo the indicated upper screw.
Remove the pedal board (B).
Page 1 of 5
Advertisement
Table of Contents
