Table of Contents
Advertisement
Suspension arms
Refit the wheels (
D2.01).
Reconnect the battery (
Refit the luggage compartment cosmetic shields (
Perform the vehicle set-up procedure (
Removing front suspension lower arms
The replacement arm is supplied complete with Flanbloc and ball joint.
The following procedure is for removing the lower front right hand suspension arm.
The procedure for removing the lower front right hand suspension arm is the same.
Note that in some of the following images the vehicle is shown with the wheelhouse and the front flat undertray
section removed. However, removal of these components is not necessary.
Remove the wheels (
Support the weight of the front suspension adequately.
F2.01).
A3.22).
D2.01).
Connect the connector (1) to the shock absorber.
E4.07).
Undo the spherical tie-rod pin (1)
Undo the nut (2) and remove the pin (3), retrieving
the relevant washer.
Undo the nut (4) fastening the lower arm (A) to the
hub carrier, retrieving the relevant washer.
Page 6 of 24
Advertisement
Table of Contents
