Table of Contents
Advertisement
3.5 Replacing the sill
6. Remove the 6 structural fastener rivets joining the
front sill pillar and the torque box (interior/exterior of
passenger compartment).
NOTE!
Retrieve all the rivets, using a magnet if
necessary, as any remaining rivets will cause
noise when the vehicle is in use.
7. Sand the joint weld beads between the front sill pillar
and the torque box.
NOTE!
Do not remove any other material from the
torque box.
Copyright ©
2010
6
7
6
7
Advertisement
Table of Contents
