Fuel Pump Assembly; Removing The Fuel Pump Filter - Ferrari 458 Italia Technical Documentation Manual

Hide thumbs Also See for 458 Italia:
Table of Contents

Advertisement

Fuel pump assembly

Print Exit
Copyright Ferrari S.p.A. - P.IVA 00159560366
B3.03
Fuel pump assembly

Removing the fuel pump filter

CAUTION
FUEL IS HIGHLY FLAMMABLE.
NEVER WORK ON A HOT ENGINE.
TO PREVENT FIRE RISKS AND FUEL LEAKAGE, WORK ONLY ON A COLD ENGINE WITH AN EMPTY
FUEL TANK.
CAUTION
Take every necessary precaution, since fuel residues may remain in the tank and in the pipes, even after the
operations described.
Protect the engine components adequately to allow access to the interior of the fuel tanks and work
without damaging the engine.
The fuel pump filters are fitted on the respective fuel tanks, at the front of the engine compartment.
The following procedure is for removing the left hand fuel pump. Where applicable, differences in the procedure
for the right hand fuel pump are given.
Disconnect the battery (
Drain the fuel system (
Remove the engine compartment lid (
Remove the engine compartment cosmetic shields (
F2.01).
B3.06).
E3.01).
E3.13).
Right-hand side
Disconnect the connectors (2) and release from the
bracket (12).
Undo the screws indicated.
Remove the bracket (12).
Page 1 of 9

Advertisement

Table of Contents
loading

Table of Contents