Table of Contents
Advertisement
Tyre pressure monitoring system
TYRES screen: the driver may recall the screen by using the controls on the left hand TFT display, enabling
identification of tyres with insufficient pressure at any time. When the system cannot recognise which wheel
is generating the fault signal, as the respective values cannot be displayed by the TYRES screen, the screen
is not recallable by the driver.
- TPMS not calibrated
When the TPMS system has not been calibrated or a tyre has been replaced, the TFT display displays the
specific message "TPMS not calibrated" together with the message "Execute calibration".
The vehicle symbol is not displayed. Therefore, if the fault occurs while the TYRES screen is active, the default
screen is shown automatically.
Simultaneously, the specific indicator light starts flashing and continues to flash for a maximum period of 90
seconds (determined by NTP), after which the indicator light remains lit continuously until the system is
calibrated.
The system may be calibrated via the specific option in the menu, in key-on state with the engine off.
Page 4 of 20
Advertisement
Table of Contents
