Brake pads
Print Exit
D3.04
Brake pads
Removing the front brake pads
Disconnect the battery (
Remove the wheels (
Remove the front wheels only.
Refitting the front brake pads
F2.01).
D2.01).
Disconnect connector (1) of brake pad wear sensor,
and detach it from the relative mounting bracket.
Remove the indicated cable ties.
Remove the indicated cable tie.
Remove the upper pin (2) from the relative seat,
tapping into place with a suitable mallet and
punch.
Remove the spring (3) from the relative seat.
Remove the lower pin (4) from the relative seat,
tapping into place with a suitable mallet and
punch.
Undo the screw (5).
Remove the pin (6).
Remove the brake pads (A) from the relative seats.
Page 1 of 5