Table of Contents
Advertisement
Removing the complete engine
Remove the U-bracket (35), undoing the two screws
indicated.
Undo the two screws indicated fastening the heat
shield (36).
Undo the fours screws indicated fastening the left
hand removable subframe (34) to the chassis.
Remove the indicated clamp fastening the
secondary air pipe (46) and retrieve the pipe.
From underneath, undo the two screws indicated
fastening the secondary air pump mounting
bracket to the left hand removable subframe (34).
Remove the left hand removable subframe (34)
from the chassis.
Undo the screw indicated fastening the ground
cable (38) onto the engine and release the cable
from the indicated fastener clamp on the starter
motor shield.
Page 13 of 26
Advertisement
Table of Contents
