3.3 Replacing the complete vehicle flank
Preliminary
Remove the connected parts (dashboard, interior trim, windows, doors, lateral seals, front lid and relative hinges, rear lid and
procedures
relative hinges)
Remove the fender (see chapter 2.1)
Remove the fender mounting (see chapter 2.2)
Remove the roof skin (see chapter 3.1)
Remove the rear spoiler (see chapter 4.1)
Place the vehicle on the vehicle bench.
Replacement parts
•
Complete vehicle flank (A)
•
Rear diagonal brace (B)
Material necessary
•
5 x M8 screws
•
1 x M6 nut
•
38 self-piercing rivets (Ø 4.8x7.5)
•
38 self-piercing rivets (Ø 3.9x7.0)
•
5 self-piercing rivets (Ø 3.9x7.0 p/n 81126700)
•
Bicomponent sealant mastic
•
Expanded foam
Copyright ©
2010
B
A