Table of Contents
Advertisement
4.6 Replacing the upper trellis mounting bracket
Fitting the new part
4. Mount the upper trellis mounting bracket in the jig,
centring with the bushing (A).
Prepare the weld area (see chapter 1.14).
Fitting the new part
NOTE!
Before fitting the new part, read chapter (1.15
Repair methods) thoroughly.
5. Fasten the bracket (A) to the extruded element (B)
with the M8 screw.
Caution!
Do not reuse the screws removed previously.
See paragraph (1.11.3 Screw connections).
Copyright ©
2010
A
B
A
5
Advertisement
Table of Contents
