Table of Contents
Advertisement
Hub carriers
Support the weight of the suspension adequately.
Apply three even and regularly spaced circular
beads of AREXONS SYSTEM 56A01 - HIGH
STRENGTH RETAINING COMPOUND.
Fit the hub carrier (E), fitting the axle shaft into the
relative seat on the wheel bearing.
Tighten the nut (8).
Tightening torque
Nut
Use a suitable punch and mallet to caulk (7) the ring
nut (8).
Fit the brake disc shield (D) on the hub carrier (E).
Tighten the three screws indicated fastening the
brake disc shield (D) to the hub carrier (E).
Tightening torque
Screw
Page 9 of 11
Nm
Class
275 Nm
A
Nm
Class
9 ÷ 12 Nm
B
Advertisement
Table of Contents
