Tyre pressure monitoring system
Refit the rear wheelhouses (
Left hand rear trigger
Remove the rear wheelhouses (
Remove the front element of the wheelhouse only.
Refit the rear wheelhouses (
Reconnect the battery (
Replacing the antenna (UP TO Ass.ly No. 91363)
E3.05).
E3.05).
E3.05).
F2.01).
Disconnect the connector (1).
Undo the indicated screws fastening the trigger (A)
to the relevant mounting bracket.
Remove the trigger (A) from the relevant mounting
bracket and replace.
Fit the new trigger (A) correctly on the relevant
mounting bracket.
Tighten the indicated screws fastening the trigger
(A) to the relevant mounting bracket.
Tightening torque
Screw
Connect the connector (1).
Disconnect the connector (1).
Undo the indicated screws fastening the trigger (A)
to the relevant mounting bracket.
Remove the trigger (A) from the relevant mounting
bracket and replace.
Fit the new trigger (A) correctly on the relevant
mounting bracket.
Tighten the indicated screws fastening the trigger
(A) to the relevant mounting bracket.
Tightening torque
Screw
Connect the connector (1).
Page 15 of 20
Nm
Class
9 Nm
B
Nm
Class
9 Nm
B