Table of Contents
Advertisement
Fuel tank
Refit the rear subframe (
Add fuel to the tanks.
Reconnect the battery (
Connect the DEIS diagnostic tester to the diagnostic socket (
Perform the "Fuel tank tightness test" cycle.
E2.02).
F2.01).
After connecting the quick connector pipes (6)
correctly to the fuel tank, with due caution and
pressing on both sides of the "double-lock" clips
indicated, push the clips into their seats until
they click audibly into place and the pipes are
secured correctly.
The difference between the safety clip "unclicked"
and "clicked" position is only a few millimetres.
Connect the connector (4).
Hand tighten the screw indicated by the red arrow
on the ground cable (5).
F2.10).
Page 12 of 12
Advertisement
Table of Contents
