Table of Contents
Advertisement
2.3 Replacing the front lateral trellis
7. Mount the front trellis in the jig.
Fitting the new part
NOTE!
The procedure described above must be
performed with the assistance of another
worker.
Prepare the weld area (see chapter 1.14).
Fitting the new part
NOTE!
Before fitting the new part, read chapter (1.15
Repair methods) thoroughly.
8. Weld the front trellis to the cross-member at the
original weld points on the internal side of the
vehicle.
Copyright ©
2010
8
Advertisement
Table of Contents
