Table of Contents
Advertisement
Power steering tank
Refitting the power steering tank
Tightening torque
Fastening power steering fluid pipes to reservoir
CAUTION
The oil contained in the hydraulic steering system is harmful to the eyes and skin and may also damage the
vehicle bodywork.
For vehicles UP TO Ass.ly No. 98001 when replacing the power steering fluid reservoir, the pipe from the power
steering fluid reservoir to the power steering pump and the pipe from the underbody to the power steering
fluid reservoir, the components of either RETROFIT KIT Part No. 280917, or of RETROFIT KIT Part No.
279662, must be used, referring to the indications given in the Spare Parts Catalogue.
The components of RETROFIT KIT Part No. 280917 and RETROFIT KIT Part No. 279662 are solely compatible
with the power steering fluid prescribed FROM Ass.ly No. 98002.
Disconnect the breather pipe from the cap (1).
Undo the fastener screws indicated and lift the
power steering reservoir (A).
Disconnect the two pipes (2) from the power
steering tank (A), loosening the relative clamps.
Remove the power steering tank (A).
Screw collar
Page 2 of 3
Nm
Class
4 Nm
B
Advertisement
Table of Contents
