EPB electric parking brake
Left hand EPB Bowden cable
Use a suitable screwdriver to prise the clip (1) off
the EPB linkage bracket (A).
Detach the end (2) of the left hand EPB Bowden
cable (D) from the EPB linkage bracket (A).
Press on the two indicated fastener tabs and
remove the left hand EPB Bowden cable sheath
(D) from the relative mounting bracket.
Remove the indicated clamp retaining the left hand
EPB Bowden cable (D).
Remove the indicated clamp retaining the left hand
EPB Bowden cable (D).
Page 11 of 17