Water-engine oil heat exchanger
Print Exit
B5.04
Water-engine oil heat exchanger
Removing the engine oil-water heat exchanger
There may be residual engine oil inside the heat exchanger.
Clean/dry any pooling oil/water.
Take particular care not to contaminate the two systems.
The following photos show the engine removed from the vehicle to illustrate the procedure more clearly.
However, the following procedure is also possible with the engine still installed in the vehicle.
Disconnect the battery (
Drain the cooling system (
Remove the intake manifold (
Remove the complete rail (
Remove the complete fuel rail mounting.
Remove the alternator (
F2.01).
B6.07).
B4.04).
F3.15).
F2.04).
Disconnect the connectors (5) and (6).
Page 1 of 5