Table of Contents
Advertisement
Pedal board
Tightening torque
In some of the following photographs, the dashboard has been removed from the passenger compartment to
illustrate the procedure more clearly.
Disconnect the battery (
Remove the mats (
Remove the driver side underdashboard mat.
Screw
F2.01).
E4.05).
8.5 Nm
Undo the screws indicated.
Remove the air duct (1).
Disconnect the connector (2).
Keep the brake pedal depressed.
Turn the switch (A) clockwise then ease out of its
relative mounting on the pedal board.
Page 3 of 5
Nm
Class
B
Advertisement
Table of Contents
