Table of Contents
Advertisement
2.7 Replacing the shock tower
Preliminary
Remove connected parts (complete interior, dashboard, front lid and hinges, tub)
procedures
Remove the fender (see chapter 2.1)
Remove the fender mounting (see chapter 2.2)
Remove the front lateral trellis (see chapter 2.3)
Remove the front cross-member (see chapter 2.4)
Remove the front spar (see chapter 2.5)
Remove the roof skin (see chapter 3.3)
Remove the wheel bay cover plate (see chapter 2.6)
Place the vehicle on the vehicle bench.
Replacement parts
•
Shock tower (A)
•
Wheel bay cover plate (B)
•
Underwindscreen covering (C)
(p/n 81302100 RH / p/n 81406900 LH)
Material necessary
•
6/8 x M8 screws
•
2 self-piercing rivets (Ø 4.8)
•
3x2 self-piercing rivets (Ø 6.4)
•
11 structural rivets (Ø 6.4)
•
Bicomponent sealant mastic
Copyright ©
2010
A
B
C
Advertisement
Table of Contents
