Brake discs
Print Exit
D3.03
Brake discs
Removing the brake discs
Remove the wheels (
Remove the rear brake callipers (
Applicable only for removing the rear discs. DO NOT disconnect the calliper fluid pipe and take particular
care not to damage the pipe when handling the calliper.
Remove the front brake callipers (
Applicable only for removing the front discs.
Refitting the brake discs
Tightening torque
Fastening brake disc - bearing
Check that the disc is in proper working condition and inspect the disc contact surface, even if new.
If any dirt, stains or greasy/oily patches are noted on the disc surface, clean thoroughly with a regular solvent,
degreaser and/or soap and water.
D2.01).
D3.05).
D3.05).
Screw
Pin
Undo the wheel locator pin (1).
Undo the screw (2) fastening the disc.
Remove the disc, easing it off the wheel bearing.
15.5 Nm
15.5 Nm
Page 1 of 2
Nm
Class
B
B