Table of Contents
Advertisement
Shock absorbers
Using a delible yellow marker pen or paint, make
reference markings on the stud bolts and relative
nuts and the eyebolts of the Flanblocs fastening
the upper arm.
Detach the tie-rod for the NRRPS motion sensor (2)
from the upper arm (B).
DO NOT use lubricants or electric/pneumatic
drivers.
Partially loosen the four nuts indicated fastening the
upper arm (B) in the following order: (a), (b), (c),
(d).
Move the shock absorber aside to facilitate the
operation.
For vehicles with "Front Lift" system
Undo the lift system fluid hose union (5).
Remove the clip (6) fastening the union (7) for the
lift system fluid hose onto the relative mounting
bracket.
Remove the union (7) for the lift system fluid hose
from the relative mounting bracket.
Page 2 of 16
Advertisement
Table of Contents
