Table of Contents
Advertisement
Silencers
Left hand silencer
NEVER reuse exhaust system clamps that
have been subjected to operating
temperature. Replace with new components.
Removal and refitting is only permitted with new
clamps for adjustment purposes during initial
installation.
Connect the central exhaust pipe (A) to the
silencers (B).
Partially tighten the clamps (2) fastening the central
exhaust pipe (A) to the silencers (B), tightening
the relative nuts indicated.
Connect the pipe (1) to the By-pass valve of the
right hand silencer.
NEVER reuse exhaust system clamps that
have been subjected to operating
temperature. Replace with new components.
Removal and refitting is only permitted with new
clamps for adjustment purposes during initial
installation.
Fit the left hand silencer (B) in the relative seat and
connect to the left hand catalytic converter (C).
Partially tighten the clamp (3) fastening the left hand
silencer (B) to the left hand catalytic converter
(C), tightening the relative nut.
Page 6 of 20
Advertisement
Table of Contents
