Table of Contents
Advertisement
Refitting the complete engine
Fit the right hand rear heat shield (12) in the
relevant seat and fasten by tightening the screws
indicated by red arrows.
Fit the right hand front heat shield (11) in the
relevant seat and fasten by tightening the
indicated screws.
Follow the same procedure to fit the front and rear
heat shields on the left-hand side of the engine.
Apply AREXONS SYSTEM 52A43 - MEDIUM
STRENGTH THREAD LOCK on the thread of
the screws indicated.
Fit the lower gearbox mounting cross-member (9) in
its seat and hand-tighten the indicated screws.
FROM Ass.ly No. 96750 (see Spare Parts Catalogue
to see vehicles not affected by modification)
Apply AREXONS SYSTEM 52A43 - MEDIUM
STRENGTH THREAD LOCK on the thread of
the screws indicated.
Fit the lower gearbox mounting cross-member (9) in
its seat and hand-tighten the indicated screws.
Page 24 of 30
Advertisement
Table of Contents
