Expansion tank
Print Exit
B6.02
Expansion tank
Removing the expansion tank
Disconnect the battery (
Remove the engine compartment cosmetic shields (
Remove the right hand engine compartment shield.
Remove the engine air ducts (
Remove the right hand air duct.
Drain the coolant from the tank by aspirating it from the filler neck.
Refitting the expansion tank
Tightening torque
Fastening expansion tank to chassis
F2.01).
B4.02).
Screw
E3.13).
Disconnect the oxygen sensor connector (1) and
remove the relative clips from the chassis.
Undo the cap (2).
Remove the clamps (3) then disconnect the relative
pipes.
Remove the clamp indicated by the red arrow,
located on the front of the expansion tank (A).
Undo the screws indicated and remove the
expansion tank (A) from the chassis.
8 Nm
Page 1 of 2
Nm
Class
B