Table of Contents
Advertisement
3.6 Replacing the rear firewall and mountings
3. Use a hex headed wrench (Ø 4.0) to remove the 16
M6 fastener screws joining the firewall and the rear
bulkhead.
4. Remove the threaded fastener rivets (M6x21.5)
joining the rear firewall and the fuel tank cross-
member.
NOTE!
Retrieve all the rivets, using a magnet if
necessary, as any remaining rivets will cause
noise when the vehicle is in use.
Copyright ©
2010
3
3
3
4
3
Advertisement
Table of Contents
