Table of Contents
Advertisement
3.6 Replacing the rear firewall and mountings
17. Fasten the rear bulkhead to the firewall with 16 M6
screws.
Caution!
Do not reuse the screws removed previously.
See paragraph (1.11.3 Screw connections).
Reapply corrosion inhibitor to the welds on the RH
and LH firewall mountings and apply a coat of primer
to the repair areas.
18. Reapply the beads of mastic sealant on the upper
portion of the rear firewall (passenger compartment
interior).
Danger!
Danger of poisoning due to fume inhalation! Risk
of injury from skin or eye contact with adhesive!
Wear breathing protection, protective gloves and
safety glasses.
Copyright ©
2010
17
17
17
18
18
17
Advertisement
Table of Contents
