Table of Contents
Advertisement
EPB electric parking brake
Detach the cable grommet (4) from the bracket on
the right hand EPB Bowden cable sheath (B).
Undo the nut (5) fastening the ground cable onto
the bracket on the right hand EPB Bowden cable
sheath (B).
Undo the indicated screw fastening the right hand
EPB Bowden cable sheath (B) onto the rear right
hand hub carrier.
Detach the eyebolt (6) on the right hand EPB
Bowden cable (B) from the fork (7) inside the
hub carrier.
Release the spring (8) and recover the adjuster pin
(9).
Do not disassemble the adjuster pin or alter its
setting to ensure that the shoes are refitted in
their original positions.
Remove the upper spring (10) by pushing towards
the brake shoes and then turning.
Remove the lower spring (11) by pushing towards
the brake shoes and then turning.
Page 6 of 17
Advertisement
Table of Contents
