Table of Contents
Advertisement
Complete suspension
Undo the six screws (12) fastening the axle shaft
(A) to the differential flange and retrieve the
three spacers (13).
Disconnect the connector (14) from the shock
absorber (B).
Support the weight of the complete suspension
adequately.
Undo the two screws indicated fastening the shock
absorber (B) to the chassis.
Using a delible yellow marker pen or paint, make
reference markings on the threaded bolts and
relative nuts and the eyebolts fastening the toe-
in tie-rod.
Page 14 of 25
Advertisement
Table of Contents
