Table of Contents
Advertisement
Shock absorbers
Reassembling the magnetorheological variable-damping shock absorber
Detach and remove the connector (1).
Immobilise the shock absorber.
Undo the nut (2).
CAUTION
The following procedure for removing the nut must be
observed precisely in order to compress and
remove the spring safely.
Partially loosen the nut (3) by just enough to
decompress the spring.
Compress the spring (A) with a suitable press.
Undo the nut (3) completely.
Retrieve the washer (4).
Slowly release the spring (A).
Remove the upper stop cap (B), complete with
hyperblock.
Remove the bushing (5).
Remove the upper spring shim (C).
Remove the spring (A).
Remove the plug (D).
Remove the lower spring shim (E).
Remove the actuator (F).
Remove the shim ring (G).
Page 12 of 16
Advertisement
Table of Contents
