Table of Contents
Advertisement
3.2 Replacing the windscreen support rib and the windscreen valence cross-member
9. Fit the underwindscreen rib against the windscreen
valence cross-member.
10. Tack the underwindscreen rib to both the windscreen
valence cross-member and the underwindscreen
covering.
Fitting the new part
NOTE!
Before fitting the new part, read chapter (1.15
Repair methods) thoroughly.
11. Fasten the windscreen valence cross-member to
the shock towers using 3x2 structural rivets (Ø 6.4).
Copyright ©
2010
10
11
10
10
11
Advertisement
Table of Contents
