Table of Contents
Advertisement
Refitting the complete DCT gearbox
Remove all the lifting tools
(AS
107572) and
(AS
107565).
Fit and tighten the four lower nuts (14) fastening the
complete gearbox (A) to the engine (B).
Tightening torque
Nut
Tighten the screws indicated fastening the starter
motor (13) to the gearbox.
Tightening torque
Screw
From underneath, remove the indicated screws
fastening the four adjuster pins onto the trolley
(AS
107572).
Slowly lower the trolly
(AS
centimetres, allowing the gearbox to rest on the
support spacer (element 05) of tool
Page 5 of 11
Nm
Class
60 Nm
A
Nm
Class
25 Nm
A
107572) by a few
(AS
107572).
Advertisement
Table of Contents
