Suspension arms
Check that the yellow reference markings are
correctly aligned: the markings on the stud bolts
and the markings on the Flanbloc eyebolts must
be aligned.
Remove the yellow reference markings made
during removal.
Using an indelible red marker pen or paint, make
reference markings on the stud bolts and relative
nuts and the eyebolts of the Flanblocs fastening
the upper arm.
Tighten the two screws indicated fastening the
shock absorber (A) to the chassis.
Tightening torque
Screw
Page 5 of 24
Nm
Class
110 Nm
A