Table of Contents
Advertisement
Hub carriers
Fit the screw (5) in the relative seat after installing
the relative washer.
Fit the relative washer and, preventing the screw (5)
fastening the upper arm (C) to the hub carrier
from turning, tighten the nut (6).
Tightening torque
Nut
Fit the link (F) and the compensator ring (10) in the
relative seat on the hub carrier (E).
Apply an even layer of grease Z2 PROTECTION to
the inner surface of the compensator ring (10) in
contact with the screw head (9).
Fasten the link (F) to the hub carrier (E), fitting and
tightening the screw (9).
Tightening torque
Screw
Fit the screw (3) in the relative seat after installing
the relative washer.
Fit the relative washer and, preventing the screw (3)
fastening the toe-in tie-rod (B) to the hub carrier
from turning, tighten the nut (4).
Tightening torque
Nut
Page 10 of 11
Nm
Class
90 Nm
A
Nm
Class
85 Nm
A
Nm
Class
80 Nm
A
Advertisement
Table of Contents
