Table of Contents
Advertisement
Tyres and rims
To more clearly identify the correct mounting positions for the tools relative to the wheel, the vertical column of
the tyre demounting machine is used as the starting point (12 o'clock).
Undo the core of the valve (A) to completely deflate
the tyre.
Place the wheel on the machine table and break the
bead on both the inner and outer sides.
Lubricate the bead (1) with the lubricant spray
provided.
Place the wheel on the self-centring clamp and use
the bead breaker to ensure that the wheel is
gripped correctly by the clamps (2) on the table.
If the machine is not equipped with a bead
breaker, clamp the wheel from the inside.
Clamp the wheel.
Page 5 of 11
Advertisement
Table of Contents
