Ferrari 458 Italia Technical Documentation Manual page 843

Brake pads
Remove the rear wheels.
Refitting the rear brake pads
Further separate the calliper pistons with the tool (FACOM DF.6).
Disconnect the connector (1) for the brake pad wear
sensor.
Cut the indicated clamps and remove the brake pad
wear sensor cable from the retainers (2).
Remove the pin (4), tapping with a suitable punch
and mallet.
Remove the spring (5).
Remove the pin (6), tapping with a suitable punch
and mallet.
Remove the brake pads (A).
Page 3 of 5