Table of Contents
Advertisement
Suspension arms
Refit the wheels (
D2.01).
Perform the vehicle set-up procedure (
Removing rear suspension upper arms
The replacement arm is supplied complete with Flanbloc.
The following procedure is for removing the right hand rear suspension upper arm.
The procedure for removing the left hand rear suspension upper arm is the same.
Remove the wheels (
A3.22).
D2.01).
Remove the yellow reference markings made
during removal.
Using an indelible red marker pen or paint, make
reference markings on the stud bolts and
relevant nuts and the eyebolts of the Flanblocs
fastening the lower arm.
Using a delible yellow marker pen or paint, make
reference markings on the stud bolts and relative
nuts and the eyebolts of the Flanblocs fastening
the upper arm.
Page 11 of 24
Advertisement
Table of Contents
