Refit the rear wheelhouses (
Refit the rear left hand wheelhouse.
Refit the rear flat undertray section (
Reconnect the battery (
E3.05).
E3.12).
F2.01).
After connecting the quick connector pipes (2)
correctly onto active carbon filter (A), with due
caution and pressing on both sides of
the "double-lock" clips indicated, push the clips
into their seats until they click audibly into place
and the pipes are secured correctly.
The difference between the safety clip "unclicked"
and "clicked" position is only a few millimetres.
Connect the connector (4).
Secure pipe (7) inside the indicated mounting rib.
Only for vehicles with TPMS tyre pressure
monitoring system (optional)
Fasten the bracket (1), complete with trigger, onto
the chassis, tightening the screws indicated.