Table of Contents
Advertisement
3.9 Replacing casting for rear shock tower
Fitting the new part
7. Mount the casting for the rear shock tower in the
jig.
Prepare the weld area (see chapter 1.14).
Fitting the new part
NOTE!
Before fitting the new part, read chapter (1.15
Repair methods) thoroughly.
8. Fasten the casting for the rear shock tower to the
shock tower itself with 3 M12 screws.
Caution!
Do not reuse the screws removed previously.
See paragraph (1.11.3 Screw connections).
Copyright ©
2010
8
8
Advertisement
Table of Contents
