Ferrari 458 Italia Technical Documentation Manual page 765

Refitting the complete DCT gearbox
Fit a hydraulic jack under the gearbox and lift it
slightly, placing it under tension, in order to
facilitate the fitting of the pin (22).
Fit the pin (22) fastening the bushing mounting (15)
to the rear subframe, after fitting the washer.
Hand tighten the nut (21) after fitting the washer.
Fit and tighten the three upper nuts (14) fastening
the complete gearbox (A) to the engine (B).
Tightening torque
Nut
Pretighten the nut (21).
Tightening torque
Nut
Tighten the nut (21).
Tightening torque
Nut
Page 6 of 11
Nm Class
60 Nm A
Nm Class
50 Nm 0
Nm Class
100 Nm B