Tyres and rims
After installing the pressure sensor (A), mount the
clean rim on the self-centring clamp, ensuring
that the wheel is gripped correctly by the clamps
(2) on the table.
Lubricate the wheel.
Pick up the tyre and ensure that the direction of
rotation is correct.
Lubricate both beads.
Fit the inflation valve (A) at 6 o'clock.
Place the tyre on the rim and tip the tool arm (4)
forwards.
Fit the lower bead under the right hand part of the
tool (4).
Turn the wheel clockwise.
Mount the bead on the rim, applying constant
pressure.
Turn the wheel, bringing the inflation valve (A) to 12
o'clock.
Page 9 of 11