Table of Contents
Advertisement
Hydraulic clutch oil system radiator
Inspect the hydraulic clutch system oil level Shell DCT F-3 (
Operation to be carried out in the event of oil spillage.
Refit the rear bumper (
Replacing the clutch hydraulic system oil radiator electric fan
Tightening torque
Fastening electric fan to clutch hydraulic system
oil radiator
Disconnect the battery (
Remove the rear bumper (
E3.04).
Nut
F2.01).
E3.04).
Clean the inlet area of the unions (2) on the radiator
with a suitable degreaser that does not leave
residues.
Remove the plugs positioned previously.
Tighten the unions (2) on the clutch hydraulic
system oil radiator (A), using the markings made
during removal as reference.
Tightening torque
Union
Clean any spilt fluid.
Fit and fasten the duct (1) by tightening the
indicated fasteners.
The internal nut is in common with the radiator
fastening to the chassis.
Tightening torque
Screw / Nut
A3.03).
Page 4 of 5
Nm
Class
35 Nm
B
Nm
Class
9 Nm
B
Nm
Class
4 Nm
B
Advertisement
Table of Contents
