Volkswagen Passat 1995 Official Factory Repair Manual page 837

Motronic fuel injection system, servicing
Read measuring value block 3
1 2 3 4
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Indicated on display (1, 2, 3 and 4 =
Display fields)
Note:
If something different is indicated on the
display:
Scan tool operating instructions
- Check throttle valve angle at closed
throttle position in display field 3.
Specification: 5-19
- Slowly open throttle valve fully and
observe angle displayed in display
field 3.
Value must increase uniformly over
the complete range
- Check throttle valve angle at wide
open throttle position in display field
3.
Specification: 85-101
- Press
button.
- Press buttons -0- and -6- to select
"End Output" function 06.
- Press -Q- button to confirm input.
- Switch ignition off.
Note:
The displayed value is dependent on
the tolerances of the throttle position
sensor and does not correspond to the
actual opening angle.
Page 53 of 94
24-47
6/12/2004