Edid (Extended Display Identification Data); Edid - IDK MSD-702UHD User Manual

4k@60 and hdcp 2.2 supported digital multi switcher
Hide thumbs Also See for MSD-702UHD:
Table of Contents

Advertisement

9.10 EDID (Extended Display Identification Data)

You can set or customize EDID to be sent to the source device. Change the setting as needed.
■ Setting EDID
Step 1 If you use copied EDID, copy the target EDID from the sink device.
Step 2 Set the EDID that will be sent to the source device.
Step 3 If you use built-in EDID, customize the data as usage.
Blu-ray player
9.10.1

EDID

Menu
Top→EDID→EDID DATA
Setting for
Each input channel (only digital input)
Setting value
・INTERNAL EDID [Default]
・OUT1A MONITOR
・OUT1B MONITOR
You can set the EDID to be sent to the source device from built-in EDID ("INTERNAL EDID"), connected sink
device's EDID ("MONITOR") and copied EDID ("COPY DATA").
EDID copied from a sink device will be displayed if any.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
Built-in EDID
Changing PC resolution
Changing AV resolution
Changing Deep Color input
Changing audio format
Changing speaker configuration
External EDID OUT1A
External EDID OUT1B
External EDID OUT2A
External EDID OUT2B
Copied EDID 1
Copied EDID 2
IN 1
Copied EDID 3
Copied EDID 4
IN 8
Copied EDID 5
Step.2
Copied EDID 6
Copied EDID 7
Copied EDID 8
[Fig. 9.19] Setting EDID (MSD-802UHD)
・OUT2A MONITOR
・OUT2B MONITOR
・COPY DATA1 to COPY DATA8
Step.3
OUT 1A
OUT 2B
Step.1
【See: 9.10.7 Copying EDID 】
LCD
83

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msd-701uhdMsd-802uhdMsd-801uhd

Table of Contents