Table of Contents
Advertisement
9.9
EDID (Extended Display Identification Data)
You can set or customize EDID to be sent to the source device. Change the setting as needed.
■ Setting EDID
(1) If you use copied EDID, copy the target EDID from the sink device.
(2) Set the EDID that will be sent to the source device.
(3) If you use built-in EDID, customize the data as usage.
Blu-ray player
9.9.1 EDID
Top → EDID → EDID DATA
Menu
Setting for
Each input channel (only digital input signal)
Setting value
・INTERNAL EDID [Default]
・OUT1 MONITOR
・OUT2 MONITOR
You can set the EDID to be sent to the source device from built-in EDID ("INTERNAL EDID"), connected sink
device's EDID ("MONITOR") and copied EDID ("COPY DATA").
EDID copied from a sink device will be displayed if any.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
Built-in EDID
Changing PC resolution
Changing AV resolution
Changing Deep Color input
Changing audio format
Changing speaker configuration
External EDID OUT1
External EDID OUT2
External EDID OUT3
External EDID OUT4
Copied EDID 1
Copied EDID 2
IN 1
Copied EDID 3
Copied EDID 4
IN 9
Copied EDID 5
Step.2
Copied EDID 6
Copied EDID 7
Copied EDID 8
[Figure 9.21] Setting EDID (Ex: MSD-7204UHD)
Step.3
OUT 1
OUT 4
Step.1
・OUT3 MONITOR
・OUT4 MONITOR
・COPY DATA1 to COPY DATA8
85
MSD-72 Series User's Guide
LCD
【See: 9.9.7 Copying EDID】
Advertisement
Table of Contents
