Edid Copy [Monitor Edid Copy] - IDK msd-804fd User Manual

7.9.7

EDID Copy [MONITOR EDID COPY]

You can load the EDID of display devices and save it in the MSD.
To use the copied EDID, select "COPY DATA" for "7.9.1 EDID setting [EDID DATA]". After that, the copied
data can be used as the same as that of the built-in data.
1. To copy the EDID using menu:
MSD-804FD
↓ SET key
[FUNCTION SELECT]
EDID
↓ SET key
[EDID]
MONITOR EDID COPY
↓ SET key
[MONITOR EDID COPY]
OUT1ANO.1 COPY DATA1
↓
[MONITOR EDID COPY]
OUT1ANO.1 COPY DATA1
↓
[MONITOR EDID COPY]
OUT1ANO.1 COPY DATA1
↓ SET key: Displays the confirmation screen
[MONITOR EDID COPY]
SAVE? = NO
↓ To save the settings: Select "YES" and press the "SET" key.
To return to the menu without saving: Select "NO" and press the "SET" key.
[MONITOR EDID COPY]
EDID COPY COMPLETE
↓
[EDID]
MONITOR EDID COPY
*OUT1B to OUT4B are available only if HDBaseT output option is mounted.
If no display device is connected to the selected output, the message is displayed,
and you cannot press the "SET" key.
2. To copy the EDID using command:
@RME: Copy EDID
Top
keys: Select "EDID".
keys: Select "MONITOR EDID COPY".
↑ ESC key: Cancels the setting and returns to the previous screen.
keys: Select the output connector (OUT1A to OUT4A, OUT1B
to OUT4B).*
keys
keys: Select the EDID number (1 to 8).
keys
keys: Enter the EDID name (20 to 7D of ASCII codes).
Up to 10 characters can be registered. The cursor moves to the next
character using ◄►keys.
keys: Select "YES" or "NO".
Displays the message for 1 second before automatically returning to
the previous screen.
↑ ESC key
133
MSD-804FD User's Guide
[MONITOR EDID COPY]
OUT1A UNCONNECTED