Configuring Wan Dhcp - Nokia ONT XS-2426X-A Product Manual

Configure a XS-2426X-A indoor ONT
Network configuration

Configuring WAN DHCP

Table 8-13 WAN parameters (continued)
Field
VLAN ID
VLAN PRI
WAN IP Mode
Manual DNS
Custom primary DNS
Custom secondary DNS
Connection Type: PPPoE
Connection trigger
Userrname
1
Password
Keep Alive Time
Keep Alive Retry
Echo Value
Notes:
1. Allowed values are limited to numbers, letters and special characters ! # + , - . / : = @ _
3
Click Save.
E
ND OF STEPS
8.21 Configuring WAN DHCP
1
Click Network WAN DHCP from the left pane. The WAN DHCP page displays.
104
Description
Enter the VLAN ID.
Enter the VLAN PRI.
Select an IP mode from the list.
Enter the Domain Name Server (DNS) to be confirgured manually.
Enter the primary Domain Name Server (DNS).
Enter the secondary Domain Name Server (DNS).
Select the connection trigger type from the list. The default option is Always On.
Enter the username to log in to the configuration server.
Enter the password to log in to the configuration server.
The PPPoE connection type triggers one heartbeat each, at the configured time interval to keep
the session online.
Allowed values: 5 to 60 seconds.
Configure the number of retries to check the Keep Alive status of the PPPoE session after
time-out.
Allowed values: 1 to 10.
Indicates the number of times, the device send messages to the server to check if the IP address
is available or not.
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA
Nokia ONT
December 2021
Issue 1