Sdp; Table 105 Id Command; Table 106 Sdp Command - Nokia 7302 Basics, Management And Oam Manual

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
(2 of 2)
5.3.5.2
Table 105
5.3.5.3
Table 106
(1 of 2)
Issue: 10
Item Description
Description This command enables the context to configure criteria to monitor specific service SAP criteria.
id
id command
Item Description
Syntax id service-id
Context monitor>service
Description This command monitors statistics for a SDP binding associated with this service.

sdp

sdp command
Item Description
Syntax sdp {sdp-id[:vc-id] | far-end ip-address} [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>service>id service-id
Description This command displays statistics for a specific service, specified by the service-id, at the
configured interval until the configured count is reached.
The first screen displays the current statistics related to the service-id. The subsequent
statistical information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the "rate per second" for each statistic is displayed instead
of the delta.
Monitor commands are similar to show commands but only statistical information displays.
Monitor commands display the selected statistics according to the configured number of times
at the interval specified.
3HH-11982-AAAA-TQZZA
Monitor Commands
103