Rear Exhaust Pipe - Subaru IMPREZA 2002 Service Manual

EXHAUST
REAR EXHAUST PIPE
4. Rear Exhaust Pipe
A: REMOVAL
1) Lift-up the vehicle.
2) Separate the rear exhaust pipe from center ex-
haust pipe.
CAUTION:
Be careful, the exhaust pipe
i s
hot.
B: INSTALLATION
NOTE:
Replace the gaskets with new ones.
1) Install rear exhaust pipe bracket to rubber cush-
ion.
NOTE:
To facilitate installation, apply a coat of SUBARU
CRC to mating area of rubber cushion in advance.
B2M310E
3) Separate the rear exhaust pipe from muffler.
Be careful not to pull down rear the exhaust
pipe.
CAUTION:
4) Remove rear exhaust pipe bracket from rubber
cushion.
NOTE:
To facilitate removal, apply a coat of SUBARU
CRC to pipe bracket in advance.
SUBARU CRC (Part No. 004301003)
/
S2M056C
SUBARU CRC (Part No. 004301003)
2) Install the rear exhaust pipe to muffler
Tightening torque:
48 N.m (4.9 kgf-m, 35.4 ft-lb)
3) Install the rear exhaust pipe to center exhaust
pipe.
Tightening torque:
18 N.m (1.8 kgf-m, 13.0 ft-lb)
B2M310S
EX(S0HC)-9