4. Rear Exhaust Pipe
A: REMOVAL
1) Separate the rear exhaust pipe from center ex-
haust pipe.
CAUTION:
Be careful, the exhaust pipe is hot.
2) Separate the rear exhaust pipe from muffler.
CAUTION:
Be careful not to pull down the rear exhaust
pipe.
3) Apply a coat of SUBARU CRC to mating area of
the cushion rubbers in advance.
SUBARU CRC (Part No. 004301003)
4) Remove the rear exhaust pipe bracket from the
cushion rubber.
B: INSTALLATION
1) Apply a coat of SUBARU CRC to mating area of
the cushion rubbers in advance.
SUBARU CRC (Part No. 004301003)
REAR EXHAUST PIPE
2) Install the rear exhaust pipe bracket to cushion
rubber.
NOTE:
Replace the gaskets with new ones.
3) Install the rear exhaust pipe to muffler.
Tightening torque:
B2M3109
48 N·m (4.9 kgf-m, 35.4 ft-lb)
4) Install the rear exhaust pipe to center exhaust
pipe.
Tightening torque:
G2M0382
18 N·m (1.8 kgf-m, 13.0 ft-lb)
C: INSPECTION
1) Make sure there are no exhaust leaks from con-
nections and welds.
2) Make sure there are no holes or rusting.
S2M0560
3) Make sure the cushion rubber is not worn or
cracked.
EX(w/oOBD)-13
EXHAUST
S2M0560
G2M0382
B2M3109