5.5.1 Turning on Column Thermostatting
You can turn column thermostatting on and off and set the temperature in Chromeleon or
on the instrument display.
To turn on column thermostatting from Chromeleon
1. In Chromeleon, open the Commands dialog box for the TCC.
2. Select ColumnOven.
3. Select Temperature and Nominal, and then enter the temperature. TempCtrl is
automatically set to On. Column thermostatting is active.
Set TempCtrl to Off if you do not want to use column thermostatting for a certain
application.
If you want to use column thermostatting later again, set TempCtrl to On. When you change
the temperature setting under Nominal, Chromeleon sets TempCtrl automatically to On.
To turn on column thermostatting on the front panel display
1. Show the function keys and select Temp.
2. Select Compartment and enter the temperature. Compartment control is
automatically set to On. Column thermostatting is active.
Set Compartment control to Off if you do not want to use column thermostatting.
If you want to use column thermostatting later again, set Compartment Control to On again.
When you change the temperature setting under Compartment, Compartment control is
automatically set to On.
Operating Instructions
TCC-3000SD and TCC-3000RS Column Compartments
Fig. 39: Turning on column thermostatting
UltiMate 3000 Series:
Page 73